NAD C 379 stereo stiprintuvas su DAC funkcija

Embodying half a century of audio mastery, the NAD C 379 is everything you’d expect from a Classic Series amplifier. Continuing NAD’s tradition of delivering simplicity, value, and innovation, the C 379 features the latest generation of MDC technology, 80 watts per channel of HybridDigital® UcD amplification, and a high-performance ESS SABRE DAC that lets you experience music with exceptional sonic detail and clarity.

Features & Details

Customised HybridDigital UcD Amplifier with Stereo and Bridge Modes

2 x 80 Watts per channel of Continuous Power (8 and 4 Ohms)

2 x 120 Watts per channel of Dynamic Power (4 Ohms)

Bridgeable for up to 300 Watts per channel of Continuous Power

Industry-leading ESS SABRE® PRO 32-bit/384kHz DAC

Dual MDC 2 Ports for Future Upgrades and Expanded Features

MM Phono Stage with Accurate RIAA Equalization and Ultra-Low Noise

Built-in Separate Headphone Amplifier for Low and High Impedance

HDMI eARC, Optical Digital and Coax Digital Inputs

Dual Subwoofer OutputsLINE INPUT, PRE-OUT (ANALOG BYPASS ON)

THD (20Hz – 20kHz)<0.002 % at 2 V outSignal-to-Noise Ratio>106dB (IHF; A-weighted, ref. 500 mV out, unity gain)Channel separation>100dB (1 kHz); >90 dB (10 kHz)Input Impedance (R and C)56.2 kohms + 100 pFMaximum input signal>4.6 Vrms (ref. 0.1 % THD)Output impedanceSource Z + 320 ohmsInput sensitivity257 mV (ref. 500 mV out, Volume maximum)Frequency response±0.3 dB (20 Hz – 20 kHz)Maximum voltage output -IHF load>4.5 V (ref. 0.1 % THD)

PHONO INPUT, PRE-OUT (ANALOG BYPASS ON)

THD (20Hz – 20kHz)<0.01% at 2 V outSignal-to-Noise Ratio>83dB (200 ohms source; A-weighted, ref. 500 mV out)Input sensitivity46 kohms/100 pFFrequency response±0.3 dB (20 Hz – 20 kHz)Maximum input signal at 1kHz>80 mVrms (ref. 0.1 % THD)

LINE INPUT, HEADPHONE OUT (ANALOG BYPASS ON)

THD (20Hz – 20kHz)<0.002% at 1V outSignal-to-Noise Ratio>101 dB (32 ohms loads; A-WTD, ref. 1V out, unity gainFrequency response±0.3 dB (20 Hz – 20 kHz)Channel separation>62 dB at 1kHzOutput impedance2.2 Ohms

LINE IN, SPEAKER OUT (ANALOG BYPASS ON)

Continuous output power into 8 ohms80W (ref. 20 Hz-20 kHz at rated THD, both channels driven)Continuous output power into 8 Ohms (Bridge mode)<s/trong>>300WTHD (20 Hz – 20 kHz)<0.03% (250 mW to 120 W, 8 ohms and 4 ohms)Signal-to-Noise Ratio>85 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)Clipping power>110W (at 1 kHz 0.1 % THD)IHF dynamic power8 ohms: 140W4 ohms: 250W2 ohms: 260WPeak output current>20A (in 1 ohm, 1ms)Damping factor>300 (ref. 8 ohms, 20Hz to 6.5kHz)Frequency response>±0.3 dB (20 Hz – 20 kHz)Channel separation>75dB (1 kHz)>70dB (10 kHz)Input sensitivity (for 80 W in 8 ohms)Line In: 440 mVSupports bit rate/sample rateup to 24 bit/192 kHzFrequency band2.402G- 2.480GStandby power>0.5WNetwork standby power>2W

DIMENSIONS AND WEIGHT

Gross dimensions (W x H x D)**435 x 100 x 410mm 

Weight9.04 kgShipping weight 10.88 kg