Q Acoustics 3050c garso kolonėlės

3050c

The 3050c is the ideal floorstanding loudspeaker. It’s big enough to describe all the presence and power, as well as reveal all the detail and delicacy, that's in your music - but is elegant and well-proportioned enough to not draw attention to itself as it does so.

New ground-up C³ (pronounced ‘C-cubed’) Continuous Curved Cone™ mid/bass profile ensures superior bass dynamics and smoother integration with the high frequency driver.

Based on design principles found in the newest Concept series, the hermetically sealed high frequency driver unit is mechanically isolated from the baffle, preventing modulation from the mid/bass driver.

Low colouration cabinets with P2P™ (Point to Point™) bracing, minimising low-end reverberation to improve the stereo image and soundstage.

HPE™ (Helmholtz Pressure Equaliser™) tubes disrupt the build-up of standing waves, smoothing the frequency response and reducing distortion.

Boasts a clean and contemporary aesthetic with sophisticated satin metallic driver trims.

- Bass unit: 2x 142 mm (5.65")

- Treble unit: 1x 22 mm (0.9")

- Frequency response (-6 dB): 42 Hz - 30 kHz

- Nominal impedance: 6 Ω

- Minimum impedance: 3.4 Ω

- Sensitivity (1 m, 2.83 Vrms @ 1 kHz): 91.5 dB

- Recommended amplifier power: 25 - 150 W

- Crossover frequency: 2.3 kHz

- Effective volume: 41.6 L

Dimensions (per loudspeaker) HxWxD Inc spikes and stabiliser:

1021 x 315 x 316 mm

Weight (per loudspeaker)

18.4 Kg

Mid/bass- driver design

The game changing C3 cone is at the heart of the 3000c mid/bass design. The cone’s geometry requires exceptional motor strength for optimal performance, so substantial magnets are coupled to the voice coils. The control exercised by the large magnets ensures good dynamic response, headroom and tight bass. Apart from these benefits the large magnets also ensure that pole plate and yoke are near saturated, which reduces flux-modulation and harmonic distortion.

High-frequency driver design

Based on the tweeter design principle found in the newest Concept series, the high frequency driver unit is hermetically sealed and mechanically isolated (floating) from the baffle to prevent internal pressure modulations from within the cabinet and adjacent mid/bass driver. The inner chamber is also carefully vented for lower distortion, with a lower crossover point for seamless integration through the crossover region.